US 
CAN - en Order #: 5609-20-J
Mfg #: 3056765
Fluke Calibration 5609-20-J Secondary PRT Probe, 100 Ohm 1/4x20", Bare Wire
Order #: 5609-20-J
Mfg #: 3056765
Product Highlights
If you want a very stable thermometer from –200 °C to 670 °C and are particular about the calibration, then look no further than the 5609 Secondary Reference PRT. Its short-term stability at the triple point of water is only ± 7 mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion.
The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm.
When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem.
- –200 °C to 670 °C (100 mm minimum immersion)
- Dry-well reference with 90 ° bend
- 20 in x 1/4 in
- lead wire (cable) 6 ft
- banana plugs
-
Fluke Calibration 5609-20-S Secondary Reference PRT Probe -200 to 670C, Spade Lugs, 1/4x20"Secondary Reference PRT Probe -200 to 670C,Spade Lugs,1/4x20"$2,076.00 -
Fluke Calibration 5609-9BND-L Secondary PRT Probe, 100ohm, 9" 90 Degree Bend mini spade lugsSecondary PRT Probe, 100ohm, 9" 90 Degree Bend mini spade lugs$2,024.00
-
Fluke Calibration 5609-20-D Sccondary PRT Probe, 100ohm, 1/4x20", 5-Pin DINSccondary PRT Probe, 100ohm, 1/4x20", 5-Pin DIN$2,076.00
-
Fluke Calibration 5609-9BND-P Secondary PRT Probe, 100ohm, 9" 90 Degree Bend for the 1523/1524Secondary PRT Probe, 100ohm, 9" 90 Degree Bend for 1523/1524$2,024.00
-
Fluke Calibration 5609-300-P Secondary PRT Probe, 100ohm, 6x300mm for the 1523/1524Secondary PRT Probe, 100ohm, 6x300mm for 1523/1524$1,659.00
-
Fluke Calibration 5609-500-B Secondary Reference PRT Probe -200 - 670C, Bare Wire, 6x500mm11condary Reference PRT Probe -200 - 670C, Bare Wire, 6x500mm$2,076.00
-
Fluke Calibration 5609-20-B Secondary PRT Probe, 100ohm, 1/4x20", Bare WireSecondary PRT Probe, 100ohm, 1/4x20", Bare Wire$2,076.00
-
Fluke Calibration 5609-20-P Secondary PRT Probe, 100ohm, -200 to 670C, 1/4x20" for the 1523/1524Secondary PRT Probe, 100ohm, -200 to 670C, 1/4x20" 1523/1524$2,076.00
-
Fluke Calibration 5609-9BND-A Secondary PRT Probe, 100ohm, 9" 90 Degree Bend for the 914XSecondary PRT Probe, 100ohm, 9" 90 Degree Bend for 914X$2,024.00
