US 
CAN - en Fluke Temperature Source Selection Guide
Fluke Metrology Wells can be ordered with 7 different inserts (A, B, C, D, E, F or Z). See the 914X Insert Selection Guide to choose you insert. Optionally, Fluke Metrology Wells can be ordered with Process Electronics (-P) so you do not need to bring along a separate loop calibrator.
Example Number: 9144-B-P
This is a Fluke Metrology Well model 9144 with Insert “B”, Imperial Comparison Holes and the Process Electronics Option (-P).
| Models | Field Metrology Well | Micro-Bath | ||||||||
| 9142-X | 9142-X-P | 9143-X | 9143-X-P | 9144-X | 9144-X-P | 6102 | 7102 | 7103 | ||
| Range | -25 °C to 150 °C (-13 °F to 302 °F) |
-25 °C to 150 °C (-13 °F to 302 °F) | 33 °C to 350 °C (91 °F to 662 °F) |
33 °C to 350 °C (91 °F to 662 °F) |
50 °C to 660 °C (122 °F to 1220 °F) |
50 °C to 660 °C (122 °F to 1220 °F) |
35 °C to 200 °C (95 °F to 392 °F) |
-5 °C to 125 °C (23 °F to 257 °F) |
-30 °C to 125 °C (-22 °F to 257 °F) |
|
| Display accuracy | ±0.2 °C entire range | ±0.2 °C entire range | ±0.2 °C entire range | ±0.2 °C entire range | ±0.5 °C at 660 °C | ±0.5 °C at 660 °C | ±0.25 °C | ±0.25 °C | ±0.25 °C | |
| Stability | ±0.01 °C entire range |
±0.01 °C entire range |
±0.03 °C at 350 °C | ±0.03 °C at 350 °C | ±0.05 °C at 660 °C | ±0.05 °C at 660 °C | ±0.03 °C at 200 °C | ±0.015 °C at -5 °C | ±0.03 °C at -25 °C | |
| Heating time | 25 min: -25 °C to 150 °C |
25 min: -25 °C to 150 °C |
5 min: 33 °C to 350 °C |
5 min: 33 °C to 350 °C |
15 min: 50 °C to 660 °C |
15 min: 50 °C to 660 °C |
40 min: 25 °C to 200 °C |
30 min: 25 °C to 100 °C |
35 min: 25 °C to 100 °C |
|
| Cooling time | 15 min: 23 °C to -25 °C |
15 min: 23 °C to -25 °C |
32 min: 350 °C to 33 °C |
32 min: 350 °C to 33 °C |
35 min: 660 °C to 50 °C |
35 min: 660 °C to 50 °C |
35 min: 200 °C to 100 °C |
30 min: 25 °C to 0 °C |
45 min: 25 °C to -25 °C |
|
| Immersion depth | 150 mm (5.9 in) | 150 mm (5.9 in) | 150 mm (5.9 in) | 150 mm (5.9 in) | 150 mm (5.9 in) | 150 mm (5.9 in) | 140 mm (5.5 in) | 140 mm (5.5 in) | 140 mm (5.5 in) | |
| Size (H x W x D) |
290 x 185 x 295 mm (11.4 x 7.3 x 11.6 in) |
290 x 185 x 295 mm (11.4 x 7.3 x 11.6 in) |
290 x 185 x 295 mm (11.4 x 7.3 x 11.6 in) |
290 x 185 x 295 mm (11.4 x 7.3 x 11.6 in) |
290 x 185 x 295 mm (11.4 x 7.3 x 11.6 in) |
290 x 185 x 295 mm (11.4 x 7.3 x 11.6 in) |
140 x 260 x 200 mm (5.5 x 10.38 x 8 in) |
180 x 310 x 240 mm (7.2 x 12 x 9.5 in) |
230 x 340 x 260 mm (9 x 13.2 x 10.5 in) |
|
| Weight | 8.16 kg (18 lb) | 8.16 kg (18 lb) | 7.3 kg (16 lb) | 7.3 kg (16 lb) | 7.7 kg (17 lb) | 7.7 kg (17 lb) | 4.5 kg (10 lb) | 6.8 kg (15 lb) | 9.8 kg (22 lb) | |
| Calibration included | NVLAP accredited | NVLAP accredited | NVLAP accredited | NVLAP accredited | NVLAP accredited | NVLAP accredited | Traceable certification | Traceable certification | Traceable certification | |
| Includes Process Electronics | Yes | Yes | Yes | |||||||
Fluke 914X Insert Selection Guide
INSA Insert “A”, Imperial Misc Holes
INSB Insert “B”, Imperial Comparison Holes
INSC Insert “C”, 0.25-inch Holes
INSD Insert “D”, Metric Comparison Holes
INSE Insert “E”, Metric Misc Holes w/0.25-inch Hole
INSF Insert “F”, Metric Comparison Misc Holes w/0.25-inch Hole
INSZ Insert “Z”, Blank