Dwyer Instruments 4015

Product Highlights

• Differential pressure gage, range 0-50 cm w.c.
• The Capsuhelic Gage is designed to give fast, accurate indication of differential pressures
• The gage may be used as a readout device when measuring flowing fluids, pressure drop across filters, liquid levels in storage tanks and many other applications involving pressure, vacuum or differential pressure
• Using the basic design of Dwyer's time-proven Magnehelic® gage, the Capsuhelic® gage contains a simple, frictionless movement that permits full scale readings as low as 0.5 inch water column
• The pressure being measured is held within a capsule which is an integral part of the gage
• This containment of the pressure permits the use of the gage on system pressures of up to 500 psig, even when differentials to be read are less than 0.1 inch w.c.
• The diaphragm-actuated Capsuhelic® gage requires no filling liquid which might limit its outdoor applications
• Zero and range adjustments are made from outside the gage, and there is no need to disassemble the gage in normal service
• NOTE: May be used with Hydrogen where pressures are less than 35 psi
• Accuracy: ±3% of full scale at 70°F (21.1°C). (±2% on 4000S models)
• Pressure Limits: -20" Hg to 500 psig. (-0.677 bar to 34.4 bar)
• Temperature Limits: 20 to 200°F (-6.67 to 93.3°C)
• Size: 4" (101.6 mm) diameter dial face
• Mounting Orientation: Diaphragm in vertical position
• Process Connections: 1/4" female NPT high and low pressure taps, duplicated - one pair top for air and gas, and one pair bottom for liquids
• Weight: 3 lb, 3 oz (1.45 kg) aluminum case; 7 lb, 13 oz (3.54 kg) brass case

Each Unit Includes

• Two 1/4" NPT plugs for duplicate pressure taps
• Four flush mounting adapters with screws
• Four surface mounting screws