Order #: DAQM907A
Mfg #: DAQM907A
Keysight DAQM907A Multifunction Module for the DAQ970A
Order #: DAQM907A
Mfg #: DAQM907A
Product Highlights
The Keysight DAQM907A module for the DAQ970A Data Acquisition System allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two +/-12V analog outputs - all on a single earth-referenced module. The analog outputs have two additional voltage/current sensing channels. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.
Digital Input/Output
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
Totalize Input
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors. It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
Analog Output
- 16 bits of digital input and output
- 100 kHz totalizer input
- Two +/-12V analog outputs plus two voltage/current sensing channels
Each Unit Includes
- 1 DAQM907A, Multifunction Module
- 1 Certificate of Calibration
-
Keysight DAQM903A 20 Channel Actuator/GP Switch Module for the DAQ970A20 Channel Actuator/GP Switch Module for the DAQ970A$790.00
-
Keysight DAQM904A 4 x 8 Two-Wire Matrix Module for the DAQ970A4 x 8 Two-Wire Matrix Module for the DAQ970A$790.00
-
Keysight DAQM908A 40 Channel Single-Ended Multiplexer Module for DAQ970A40 Channel Single-Ended Multiplexer Module for DAQ970A$790.00
-
Keysight DAQM901A 20 Channel Multiplexer (2/4-wire) Module for DAQ970A & DAQ973A20 Channel Multiplexer (2/4-wire) Module for DAQ970A$767.00
-
Keysight DAQM905A 2 GHz Dual 1:4 RF Mux, 50 Ohm Module for the DAQ970A2 GHz Dual 1:4 RF Mux, 50 Ohm Module for the DAQ970A$1,055.00
-
Keysight DAQM902A 16 Channel Multiplexer (2/4-wire) Module for DAQ970A16 Channel Multiplexer (2/4-wire) Module for DAQ970A$790.00
-
Keysight DAQ973A Data Acquisition System with USB, LAN and GPIBData Acquisition System with USB, LAN and GPIB$3,119.00
-
-
Keysight DAQM900A 20 Channel Solid-state Multiplexer for the DAQ970A20 Channel Solid-state Multiplexer for the DAQ970A$1,055.00
-
Keysight DAQM909A Digitizer Module, 4 Channel, 800k Samples/s, 24-bitDigitizer Module, 4 Channel, 800k Samples/s, 24-bit$2,167.00