US 
CAN - en
Pepperl+Fuchs HM-PF-USB-010031
Viator USB HART Interface
Order #: HM-PF-USB-010031
Mfg #: HM-PF-USB-010031
$662.35
Pepperl+Fuchs HM-PF-USB-010031
Viator USB HART Interface
Order #: HM-PF-USB-010031
Mfg #: HM-PF-USB-010031
The Viator® USB HART Interface provides a flexible PC communication link to HART networks. It is used to commission, service, calibrate, and acquire data from any HART field device or transmitter. The interface is compact and rugged for field use.
Product Highlights
- Fully HART compliant for communication with any HART instrument and error-free slave testing
- Easy installation (Software Drive included)
- CE approved for sale in Europe
- Draws power from USB port and needs no external power supply
- Rugged ABS plastic case gives you industrial-grade reliability in a small package
- USB 1.1 compliant
- Integral 6-foot connector cable terminates in two test clips
- Integral 6-inch USB connector cable
- Polarity insensitive so you may attach either one of the test clips to positive or negative poles
- Transformer isolation allows you to connect the unit across the current sense reistor or the field device
- Compatible with 32- and 64-bit Windows® 7, 8, XP, 10, or Vista
| Product Description | ||
|---|---|---|
| Interface for commissioning, calibrating, and acquiring data from HART field devices | ||
| Supply | ||
| Input current | 30 mA at 5 V | |
| Power supply | Powered by USB port , No external power required | |
| Interface | ||
| Interface type | USB port | |
| Signal | 0.5 ± 0.1 Vpp trapezoidal wave at 1200/2200 Hz, 24 VDC at 40 mA to device | |
| Galvanic isolation | ||
| Output/interface | 1500 V DC | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012 | |
| System requirements | ||
| Operating system | Windows® 98 , 2000 , 32-bit XP , 32-bit Vista , 32- and 64-bit Windows® 7, and Windows® 10 | |
| Ambient conditions | ||
| Operating temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 0 ... 95 % non-condensing | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | USB (type A) Connector , red and black test clips | |
| Material | Polycarbonate | |
| Dimensions | 75 mm x 33 mm x 15 mm | |
| Cable length | 1.8 m 2-strand wire terminating in 2 test clips , 15.2 cm cable terminating in 1 USB type A connector | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. | |