InTest - Temptronic TP04100A for Rent, ThermoStream Thermal Inducing System

Product Highlights

The ThermoStream TP04100A offers convenient thermal testing on your benchtop. Temperature range is -20C to +225C.

The Temptronic TPO4100A ThermoStream Thermal Inducing System is a tabletop temperature forcing system used to perform device, board, and module testing right where you need it – at your test bench, in your production facility, or in your lab. With a temperature range from -20° to 225°C, the Temptronic TPO4100A offers an airflow rate of 2 to 6 scfm. The TPO4100A offers two modes of operations; manual operation for cycling at Hot/Ambient/Cold and program operation for setting thermal cycling sequences. From their traditional applications in semiconductor testing, failure analysis, and device characterization to their broader use in PCB and electronic sub-assembly testing, the Temptronic TPO4100A has the temperature capabilities to meet your needs.

Features include:

• Airflow Rate: 2 to 6 scfm ( 1 to 3 l/s)
• Create up to 10 ramp/soak/cycle thermal test routines
• Intuitive, user-friendly menu control
• Temperature Control Modes: Air or Patented DUT Dual Loop Control²
• DUT Control Sensors: Type T or Type K ThermoCouple
• Modes of Operation: Two: Manual Operation for cycling at Hot/Ambient/Cold; Program Operation for setting thermal cycling sequences, "At Temperature" Windows and other parameters.
• Remote interfaces: IEEE.488, RS232, and ST/EOT
• TPO4100A hermal Cap provides a localized thermal test environment, protecting from moisture condensation at the DUT site.
• Handheld thermal wand for flexibility in bringing temperature to device; optional bench stand for hands-free operation
• Compact, portable system fits benchtop
• CE Compliant and CFC-free
• Transition Rates:
            -55°C to +125°C, <10 seconds
            +125°C to -55°C, <10 seconds
• Temperature  Display & Resolution: ±1°C
• Temperature Accuracy: ±1°C
• Directly Control the device under test (DUT)
• Thermal Cap provides a localized thermal test environment
     protects from moisture and condensation at the DUT site
• LabView drivers
• Heated Defrost to quickly remove moisture buildup from the internal chiller
• Heat Only Mode to reduce power usage when cold temperatures are not used
• Automatic Power Reduction to reduce power usage during idle periods