Amplifier Research 50S1G6 for Rent, Amplifier, 50Watts, CW 0.7GHz-6GHz

Order # 50S1G6-RENT2 | Mfg # 50S1G6-RENT2

Request a Rental Quote









Have a Question? Speak to a Transcat Rental Expert: 800.264.4059

Have a Question?

Speak to a Transcat Rental Expert at 800.264.4059

Tariff fees or manufacture imposed surcharges may be applicable.

This product is available for shipping to the United States, Canada, and Puerto Rico only.

Overview

Product Highlights

The Amplifier Research 50S1G6 is a solid-state, Class A design, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

The Amplifier Research 50S1G6, when used with a sweep generator, will provide a minimum of 50 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 50S1G6 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF amplifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to cooling blockage or fan failure.

There is a digital display on the front panel to indicate the operate status and fault conditions if an over - temperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared. All amplifier control functions and status indications are avail able remotely in GPIB/ IEEE - 488 format, RS-232 hardwire and fiber optic, USB, and Ethernet. The bus interface connector is located on the back panel and positive control of local or remote operation is assured by a Local/Remote switch on the front panel of the amplifier.

Technical Resources

Specifications

Rated Power Output 50 watts minimum
Input for Rated Output 1.0 milliwatt maximum
Power Output @ 3dB Compression Nominal: 65 watts
Minimum: 50 watts
Power Output @ 1dB Compression Nominal: 50 watts
Minimum: 40 watts
Flatness ±1.5 dB typical
±2.5 dB maximum
Frequency Response 0.7 - 6 GHz instantaneously
Gain 48 dB minimum