Order #: INSMB4V
Mfg #: INSMB4V
SPM Instrument INSMB4V
Order #: INSMB4V
Mfg #: INSMB4V
Product Highlights
Intellinova Parallel MB VIB/Dual technology is a small unit for parallel measurement on four channels, monitoring operating condition by means of:
- Vibration measurement (ACC, VEL, DISP rms, HD ENV)
- Symptom values (BPFO etc.)
- Spectrum
- Time signal
- Shock pulse measurement incl. lubrication condition (HDm/HDc, LR/HR)
The ACC, VEL and DISP rms values are measured within a user defined frequency range. The symptoms are defined by the user as a fundamental frequency and its harmonics where sidebands can be included.
A spectrum or time signal can also be generated for further processing. A cumulative moving average is calculated for all measured parameters and symptoms. These averages can also be used to trigger alarms. Both vibration and shock pulse measurements can be performed using DuoTech accelerometers that use a standard IEPE interface.
A DIO (Digital Input Output) configured as an input can be used to activate a measurement. Measuring results and symptom values are compared with an alarm level set up and can activate any of the 6 DIOs which can control, e.g. a relay. Alarms can be set with or without delay, based either on time or number of measurements. The unit can be set up to repeat its configured measurements as often as possible, and a LED for every channel indicates the status of the latest measurement. Two RPM inputs can be used for measurements based on order tracking.
The unit can operate in online or offline mode, selected by rotary switches on the front. When set to online mode, the unit operates as a Modbus RTU where the Modbus master configures the measurements and reads the result. When run in offline mode, the measurements are defined in an internal text file created in the configuration software PRO230. The text file can contain a large number of unique configurations selected with the rotary switches on the front panel. The text file is transferred to the unit using the COM port, which is also used for updating the firmware.
-
SPM Instrument TRA73External Transducer w/Probe for BC100Special Price $1,062.72 Regular Price $1,107.00
-
-
Keysight B2911B Precision Source/Measure Unit, 1ch, 10fA resolution, 210VPrecision Source/Measure Unit, 1ch, 10fA resolution, 210V$13,789.00
-
SPM Instrument EAR12Headphones with Eardefenders for BC100Special Price $353.52 Regular Price $368.26
-
Keysight B2902B Precision Source/Measure Unit, 2ch, 100fA resolution, 210VPrecision Source/Measure Unit, 2ch, 100fA resolution, 210V$14,518.00
-
SPM Instrument TRA74Transducer with Quick Connector for Adapters for BC100Special Price $592.77 Regular Price $617.47
-
Keysight B2912B Precision Source/Measure Unit, 2 channel, 10fA resolution, 210VPrecision Source/Measure Unit, 2ch, 10fA resolution, 210V$21,348.00
-
Keysight B2901BL Precision Source/Measure Unit, 1ch, 1pA resolution, 21V, 1.5APrecision Source/Measure Unit, 1ch, 1pA resolution, 21V, 1.5A$6,084.00
-
Keysight N6784A Source/Measure Unit, General Purpose, 4-QuadrantSource/Measure Unit, General Purpose, 4-Quadrant$5,786.00
-
Keithley 2470 1100 V System SourceMeter SMU Instrument1100 V System SourceMeter SMU Instrument$12,400.00
-
Keysight B2910BL Precision Source/Measure Unit, 1ch, 10fA resolution, 210V, 1.5APrecision Source/Measure Unit, 1ch, 10fA resolution, 210V,1.5A$7,141.00
-
-
Keysight N6781A Source/Measure Unit for Battery Drain AnalysisSource/Measure Unit for Battery Drain Analysis$8,252.00
-
Keysight N6782A Source/Measure Unit for Functional Test, 2-QuadrantSource/Measure Unit for Functional Test, 2-Quadrant$6,588.00
-
Keysight B2901B Precision Source/Measure Unit, 1ch, 100fA resolution, 210VPrecision Source/Measure Unit, 1ch, 100fA resolution, 210V$9,885.00
-
SPM Instrument CAB52Remote Monitoring Cable for Barring CheckerSpecial Price $127.52 Regular Price $132.84
-
Keysight B2962B 6.5 Digit Low Noise Power Source, 32W, 210V, 3A, 2 Channel6.5 Digit Low Noise Power Source, 32W, 210V, 3A, 2ch$15,281.00